Edwards & Co PA0100 Скачать руководство пользователя страница 3

GENERAL WARNINGS

To reduce the risk of 

SERIOUS INJURY 

or 

DEATH

, read this owner’s 

manual and your vehicle owner’s manual before installing and 

using this base.  By properly using this base and following these 

instructions, you will greatly reduce the risk of serious injury or 

death to your child from a collision.

•  This product is designed to be used with ISOFIX OR Belt Fix.  

NEVER

 use the device with both ISOFIX and Belt Fix anchors 

together as this can negatively impact performance in a crash.

•  The multi-fix base is an approved ISOFIX CHILD RESTRAINT 

SYSTEM. It is approved to regulation No.44/04.

•  The base can fit vehicles with positions approved with ISOFIX 

anchors, depending on the category of the child seat and of the 

fixture. 

 ALWAYS 

refer to your vehicle’s handbook before using 

base.  The mass group and the ISOFIX size class for which this 

device is intended is: Group 0+, E – ISO/R1.

•  When the device is used with a car seat 3-point seat belt, 

it is only suitable for use in the listed vehicles fitted 3 point, 

approved to ECE Regulation No.16 or equivalent standards.

•  The multi-fix base can only be used with the Ed & Co Car Seat 

Capsule.  NEVER use this product with another capsule shell.

•  NEVER

 

LEAVE YOUR CHILD UNATTENDED IN THE CAR SEAT

•  NEVER USE THE BASE IN A PASSENGER SEAT FITTED  

       

WITH AIRBAGS. ONLY FIT

 to a forward-facing passenger seat. 

• 

NEVER

 use the product without fastening it into your vehicle.

• 

NEVER

 alter or modify the product in any way as this may 

affect its performance in the event of a collision.

• 

The base is suitable from birth up to 13kg (approximately 12-15 

months old).

• 

DISCARD

 the base if it is involved in a serious collision 

EVEN

 if 

no damage is visible.

•  NEVER

 place heavy items on top of the base as this may distort 

the plastic.

•  Do not store in areas that may get particularly hot in summer, 

like roof space, car boots or beside shed walls. 

3

designed in NZ

Содержание PA0100















Отзывы: