Edwards & Co Capsule 2 Series, Инструкция по эксплуатации

Страница: 16 / 20

Adjusting the shoulder belt height
There are three height slot positions for the shoulder belts. As your
child grows, you will need to move the belts according to your child’s
height.
WARNING
- the shoulder belts should be positioned so that they sit
level with your child’s shoulders. Diagram 1 shows the correct belt
position.
To adjust the shoulder belt height:
1. Remove the ends of the shoulder belts from the metal splitter
plate behind the seat as shown in Diagram 2.
2. Pull the belts through to the front of the seat.
3. Re-insert the belts through the appropriate slots in the seat shell
and through the layers of cushioning as appropriate.
4. Re-attach the loops on the belts to the metal splitter plate. Make
sure the belt does not twist in any way.
IMPORTANT – only use the top layer of insert cushioning when the
shoulder belts are in the lowest two positions.
IMPORTANT - do not allow the harness belts to become
twisted as this may decrease the performance of the car seat in the
event of a crash. The belts should be flat against your child’s body.
16