6
11.
The browser will then load a new screen and
begin to auto detect the sensor(s); this can take a
minute. (You can stop the search when the sensor
is found.)
12.
If the browser does not auto detect the sensor(s),
select “Search for sensors”.
13.
Once the sensor is found you will see an icon on
the left side of the screen for the respiration
sensor. The icon will display real time data.
14.
Click on the “Module setup” button located on
the respiration sensor icon in the module window
to change the respiration probe settings if need
be.
15.
Click on the experiment set up button to change
the experiment settings if need be (Experiment
duration for example).
16.
To run an experiment and collect data, select
“On-Line” experiment, then select "Run".
17.
If you have a newer generation 900-268 (with the
USB icon on the cover) this can be used as a 900-
213, meaning you can tether the probes directly
to the computer using the 900-268. To engage
operation in this fashion, press 3 times on the
panel key. Repeating this operation will return
the unit to WiFi mode.
Operation with Edu-Logger viewer
Materials needed:
900-255 Respiration Sensor
900-272 Viewing Module
900-215 Battery
Procedure:
1.
Connect the respiration sensor to the left side of
the viewer.
2.
Connect the 900-215 module to the right side of
the viewer.
