4
Procedure:
1.
Install the Edu-Logger software
2.
Connect the 900-213 module to the PC or Mac
3.
Connect the respiration sensor to the 900-213
module (they directly plug together). Please note
there is no calibration required for this sensor.
4.
Open the Edu-Logger software.
5.
Once a respiration sensor logo appears on the left
side of the screen the probe has been
automatically identified and you can begin
experimentation.
6.
If the respiration sensor is not automatically
identified then click the “Search for sensors” icon
to find the sensor.
7.
Select the “On-line experiment” button; this will
open a graph below.
8.
Click on the “Module setup” button located on
the respiration sensor icon in the module window
to change the sensor settings if need be.
9.
Click on the "experiment set up" button to change
the experiment settings if need be (experiment
duration for example).
10.
The respiration sensor will give a live reading in
the box to the left of the screen while plugged in.
11.
To run an experiment and collect data click “Run
experiment”.
12.
To end data collection early, click “Stop
experiment”.
Tablet, smart phone device
Materials needed:
900-255 Respiration Sensor
900-268 WiFi module
900-215 Battery
Your respiration sensor needs to be connected to a
900-268 module. The 900-268 module will create a
closed Edu-Logger WiFi network which will stream
