EDNord QMS 4060, Руководство пользователя

Страница: 232 / 340

Status Messages
QMS 4060 Print System Operation 9-10
REPLACE WASTE TONER
BOTTLE
The waste toner bottle
is full and should be
replaced. Replace the waste
toner bottle. Refer to
chapter 2,
“Consumables,” for
details.
RESETTING ACCOUNTING
The reset accounting
operation is in process.
STACKER PATH JAM
Paper has jammed
while passing through
the stacker (LCOS). Check the LCOS area
inside the door. See
chapter 4, “Printer
Jams.”
TONER LOW
The toner is low. There
is enough toner to print
up to 100 more pages
depending on the type
of paper used. Replace the toner.
Refer to chapter 2,
“Consumables,” for
details.
TONER OUT
The toner hopper is
completely out of toner. Replace the toner.
Refer to chapter 2,
“Consumables,” for
details.
UPPER DOOR OPEN
The upper output door
is open or not
completely closed Close the upper output
door until it latches.
UPPER RIGHT DOOR
OPEN
The upper right door is
open or not completely
closed Close the upper right
door until it latches.
XXXX JAM
Paper has jammed in
the specified location in
the printer. Locate and remove the
jam. See chapter 4,
“Printer Jams,” for
locations.
WAITING FOR IDLE
An active job is in
process. Access to the
menu is not allowed
until the job is finished. Wait until the print job
is finished and the
printer goes idle.
This status message... means... do this...
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500