EDNord QMS 4060, Руководство пользователя

Страница: 152 / 340

Message
Display and
Console Modes
QMS 4060 Print System Operation 6-12
n
Admin mode
Administrators can use the admin command to take the printer
off line and enter the admin mode to configure the printer. Only
one console session can be in admin mode at a time. This mode
is indicated with the admin prompt:
admin->
If the administrator password is enabled, you are prompted to
enter it before you can access admin mode. Usually this pass-
word is set by the system administrator through the printer control
panel using a security card or a security disk, depending on your
system. If you enter an invalid password, an
***Invalid password ***
message displays, and then the remote console prompt displays.
If the printer is idle when you enter the admin mode, the printer is
automatically taken off line and the prompt changes to
offline->
n
Blocked mode
A console is in blocked mode when the administrator or another
user is in admin mode or offline mode, or when the printer is put
in offline mode from the printer control panel. It is indicated with
the following:
System Offline
offline->
The current mode of the console determines the type of command
you can execute. For a list of commands allowed in admin, user,
offline, and blocked modes, type
help
↵
or the shorthand version,
?
↵
. See “Console Commands” on page 6-14 for more information.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500