EDNord magicolor 5450 Скачать руководство пользователя страница 177

Страница: 177 / 208

Status, Error, and Service Messages

163

Error Messages (Operator Call:

)

This message...

means...

do this...

ADJUST TRAY1

Tray 1 was specified
with the printer driver
for printing, but Tray 1
is not installed.

Install Tray 1.

COVER OPEN
DUPLEX COVER

The duplex cover is
open.

Close the duplex cover.

COVER OPEN
FRONT COVER

The printer’s front
cover is open.

Close the front cover.

COVER OPEN
SIDE COVER

The printer’s right
side cover is open.

Close the right side
cover.

COVER OPEN
TRAY

COVER

The right side cover
of Tray

(Tray 3 or

4) is open.

Close the right side
cover of the tray.

FUSER MISSING
CHECK UNIT

The fuser unit is not
installed.

Contact Technical Sup-
port with the error infor-
mation.

HOLD JOB ERROR
UNABLE TO
STORE JOB

The specified print job
saved on the hard
disk is sent while the
hard disk is not
installed.

Print jobs can be saved
only if a hard disk is
installed. If desired,
install a hard disk.

MANUAL EMPTY
“SIZE”
“MEDIA”

Tray 1 was specified
with the printer driver
for printing, but Tray 1
is empty.

Load the correct media
into Tray 1.

MANUAL FEED
“SIZE”
“MEDIA”

The Paper Source in
the printer driver is
set to Tray 1 (Manual
Feed), but there is
already media in the
tray when printing
begins.

Press the Up key to
print, or remove and
reload the paper in Tray
1.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633350

Содержание magicolor 5450

















































































































































































































Результаты поиска

Содержание magicolor 5450

Отзывы:

EDNord magicolor 5450, Руководство пользователя, Страница: 177 / 208

Результаты поиска

Содержание magicolor 5450

Отзывы: