EDM Solution 6+6 Wireless-AE, Руководство оператора

Страница: 34 / 72

Master Code Functions
Master Code functions are designed to allow those users that have the
appropriate priority level to perform certain functions of a supervisory level.
These functions can only be carried out while the system is in the disarmed
state.
The default Master Code is
2580
and is known as User 1. It is possible for
this system to have multiple Master Codes. Please check with your installer as
to how your system is configured.
To enter the required Master Code Function, enter your followed
by the required digit and the button.
+ +
These functions can only be carried out when the system is in the disarmed
state.
Function Description
0 Arm Or Disarm Both Areas At The Same Time
1
Changing and Deleting User Codes
2 Changing Domestic Phone Numbers
3 Event Memory Recall
4
Walk Test Mode
5 Fault Analysis Mode
6 Setting The Date and Time
7
Turn Day Alarm On and Off
8 Reset Latching Outputs
9 Initiate Modem Call
Table 15: Master Code Functions
Arm Or Disarm Both Areas At The Same Time
This option allows you to arm or disarm both areas at the same time when the
system has been partitioned. Both areas will arm or disarm to follow the state
of the area that the code was entered from (ie: If you disarm an area, the other
area will disarm, or if you arm an area, the other area will arm as well).
This allows a user to ensure that both areas will be armed by pressing one extra
button rather than entering a user code at both area codepads.
How To Arm Or Disarm Both Areas At The Same Time
1.
Enter your followed by
0
and the button.
Two beeps will be heard and both areas will arm or disarm.
+
0
+
0
34
Solution 6+6
Operators Manual
ISSUE123.DOC Electronics Design and Manufacturing Pty Limited