EDM Solution 6+6 Wireless-AE, Руководство оператора

Страница: 12 / 72

Code Retries
Code retries restricts the amount of times an invalid user code can be used in
an attempt to operate the system. An alarm caused by this is known as a
"Codepad Tamper Alarm". When a codepad tamper alarm occurs, the system
will carry out the following events;
1.
Activate the sirens and strobe connected to the control panel. Contact
your installer if you require this to be silent.
2.
Shutdown all codepads that are connected and automatically disable them
from operating the system. Your installer programs the length of time
they are disabled for.
3.
Send an "Access Denied" report to the base station receiver (Optional).
This function operates when the system is in the armed or disarmed state. Each
time the system is armed or disarmed, the code retry counter will be reset. The
number of incorrect code attempts can be anywhere between 1 to 15. This
value is programmed by your installer. Refer to the "Installation Notes" on
page 66 for the number of code retries set by your installer.
Codepad Lockout Time
The codepad will be locked out for the time programmed by your installer if
the wrong code has been entered more times than allowed by the code retry
attempts.
Codepad Extinguish Mode
This option when programmed by your installer will allow the indicators on
your codepad to automatically extinguish when the codepad is not used for a
period of sixty seconds.
The indicators will illuminate once a button has been pressed on the remote
codepad, when an alarm has occurred or when the systems entry time has been
activated. The indicators will not illuminate when a silent alarm has been
triggered. This option can only be programmed by your installer.
12
Solution 6+6
Operators Manual
ISSUE123.DOC Electronics Design and Manufacturing Pty Limited