EDM Solution 6+6 Wireless-AE, Руководство оператора

Страница: 19 / 72

System Indicators and Operations
CP5 Eight Zone Codepad
The codepad is the communications interface between you and
your alarm system. It allows you to issue commands and offers
both visual and audible indications that guide you through the
general operation.
The codepad incorporates numerous indicators. There are
ZONE
indicators which are used to show the condition of each
zone and four others for general status. The following is a list
of situations and the relevant indications that will be seen.
Figure 1: CP5 Eight Zone Codepad
Zone Indicators
The
ZONE
indicators are used to show the status of the zones. The following
table lists the various circumstances that the indicators will display (ie. Zone
Sealed, Zone Unsealed).
Indicator Definition
On Zone Is Unsealed
Off Zone Is Sealed
Flashing Very Fast
(0.1 Sec On – 0.1 Sec Off)
24 Hour Tamper Zone In Alarm Condition
Flashing Fast
(0.25 Sec On – 0.25 Sec Off)
Zone Is In Alarm Condition
Flashing Slow
(1 Sec On – 1 Sec Off)
Zone Is Manually Isolated
Flashing Very Slow
(2 Sec On – 1 Sec Off)
24 Hour Tamper Zone In The Unsealed State
Table 2: Zone Indicators
AWAY Indicator
The
AWAY
indicator is used to indicate that the system is armed in the AWAY
Mode.
Indicator Definition
On
System Is Armed In AWAY Mode
Off
System Is Not Armed In AWAY Mode
Table 3: AWAY Indicator
STAY Indicator
The
STAY
indicator is used to indicate that the system is armed in the STAY
Mode.
Indicator Definition
On System Is Armed In STAY Mode
Off System Is Not Armed In STAY Mode
Flashing
System Is In Isolating Mode
Table 4: STAY Indicator
Solution 6+6
Operators Manual 19
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC