3
Auto Range Digital Clamp Meter - True RMS 1000A AC/DC
• Follow all safety and operating instructions to ensure maximum personal
safety during the operation and to ensure the meter is used safely and is kept
in good operating condition.
• Read the operating instructions thoroughly and completely before operating
your meter.
• Pay attention to WARNINGS, which will inform you of potentially dangerous
procedures. The instructions in these warnings MUST be followed.
• Always inspect your meter and test leads for any sign of damage or
abnormality before every use. If any abnormal conditions exist (i.e. broken test
leads, cracked cases, display not reading, etc.). DO NOT attempt to take any
measurements.
• Please DO NOT store or use meter in areas exposed to direct sunlight, high
temperature, humidity or condensation.
• Never ground yourself when taking electrical measurements. Keep your body
isolated from ground by using dry clothing, rubber shoes, rubber mat or any
approved insulating material.
• Be careful when working with voltages above 60V DC or 30V AC rms. Keep
fingers behind the probe barriers while measuring.
• To avoid damages to the instrument, NEVER exceed the maximum limits of the
input values shown in the technical specification tables.
• Never use the meter to measure voltages that might exceed the maximum
allowable input value of any function.
• Never touch exposed wiring, connections or any live circuit when attempting
to take measurements.
• Before rotating the range selector to change functions or opening the battery
case, ALWAYS disconnect test leads from the circuit under test.
• Never use the meter unless the back cover is in place and fastened completely.
• Do not use abrasives or solvents on the meter. To clean it using a damp (not
wet) cloth and mild detergent only.
• Qualified and trained service technicians should only perform calibration and
repair of the meter.
1.2. Symbols
Important safety information, refer to the operating manual.
Dangerous voltage may be present.
Earth ground.
Double insulation (Protection class 1000V CAT II 600V CAT III).
5163840K_Instructions.qxd 22/09/2009 08:46 Page 3
