3
Assembly
The chain is inserted into a plastic guide channel. It is not
packaging material. Do not throw away! Unfold the two
sections of chain. You may leave the limit stops “H” and
“V” in the rail.
Attach release cord grip to the carriage cord by sliding it
on and knotting the cord. Hang the chain out as shown
and thread it onto the sprocket on the underside of the
carriage. Note the position of the chain with guide as
shown in the side view at left. If the sprocket does not
turn, pull the release cord one time. This unlocks the
carriage.
Slide the carriage and chain assembly onto one section of
C-Rail to the approximate mid-position.
