22
i.
Channel: press [OK] key to enter channel list
and select channel that you want to setting.
ii. Date: use number keys to input your wakeup
date.
iii.
On Time: use number keys to input your wakeup
time. Once the time’s up, no matter what the
system is in standby mode or in playing mode,
the system will automatically switch to the
channel you want and start to play.
When you select “Message” (reminding
message) option in “Timer Service”, the screen
will display like below:
iv. Wakeup Message: press [Left/Right] key to select
reminding message as Birthday, Anniversary and
General.
v. Date, you can use number key to input your
wakeup date.
vi. On Time: use number keys to input your wakeup
time. Once the time’s up, no matter what the
system is in standby mode or in playing mode,
the system will automatically pop a reminding
message.
vii. The message will always display on the screen,
you can press [Exit] key to close it.
viii. Press [MENU] key to exit the current menu.
11.6 Parental Control
You can set a password for anyone who wishes to
operate in the “Installation” menu. And you can also set
the password for the lock channels. (How to set the lock
channel please refer to LOCK) Here will show you how
to setting and how to revising the password.
1
In “Parental Lock” function, press [OK] key, there
will pop a dialogue for you to input the password.
When you input the correct password, you will see
a screen like below:
2
Menu Lock determining that when user wishes to
enter “Installation” menu, whether have to input
Password or not. If the setting of “Menu Lock” is
“On” which means user have to key in password,
set “Off” means unlock.
3
Channel Lock determining that when user wishes
to play the lock channels, whether have to input
the password or not. If the setting is “On”, play the
channels with lock mark will show up a dialogue on
the screen and ask for the password. If the setting
of “Channel Lock ”is “Off”, the Lock function will
invalid.
4
New Password is used for revising password; you
can input the new password in this item by using
number keys directly. After you filled in 4 digital
numbers, the highlight will auto skip to Confirm
Password and ask you to input the new password
again. If the password is correct, the screen will
show up a message of “Saving Data, Please
Wait…” After finish saving and drawback to
“System Setup” menu, the revising is complete.
5
Press [Menu] key to draw back from the “Parental
Lock” menu.
Содержание DV3 C
Страница 1: ...User s Guide www edision gr...