manualshive.com logo in svg

Edirol PCR-M30, Руководство пользователя

Поделиться
Скачать
Edirol PCR-M30 Скачать руководство пользователя страница 58

 

58

 

Use MIDI functionality

 

• If you set 

 

[S1--S8]

 

, 

 

[R1--R8]

 

, or 

 

[P2]

 

 to NOTE ASSIGN, the specified velocity value will be 

transmitted when the controller is at its maximum position. If the controller is lowered 
slightly below its maximum position, note messages with a velocity of zero will be 
transmitted.

• If you assign this to 

 

[B1–B6]

 

 or 

 

[P1]

 

, the specified velocity value will be transmitted when 

you turn the controller on. When you turn the controller off, a note message with a velocity 
value of 0 will be transmitted.

■

Advanced mode

Advanced mode 1

 of NOTE ASSIGN lets you specify the velocity value in addition to the items 

of Basic mode.

1.

Press the 

[EDIT]

 button.

2.

Slightly move the controller to which you want to assign a Note message. 
In the case of a button, press that button.
The display will indicate the number of the selected controller.

3.

Verify that the display indicates the correct controller, and press the 

[ENTER]

 button.

4.

Press the 

[NOTE]

 key and then press key 

[1]

.

The display will indicate “NT1.”

5.

Press the 

[ENTER]

 button.

6.

Input the channel.

7.

Press the 

[ENTER]

 button.

8.

Input the note number.

fig.v

9.

Press the

 [ENTER] 

button.

The display will indicate “V–.”

10.

Input the velocity.

fig.p

11.

Press the 

[ENTER]

 button.

The display will indicate “P–.”

12.

Specify the output port. (

➔

“Specifying the port”

 (p. 59))

13.

If you are making an assignment for a button, specify the button mode. 
(

➔

“Specifying the button mode”

 (p. 59))

*1 Reference

*1 Reference

 

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode 

of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value, 

or will blink if the value is different.

PCR-M30/50/80.book 58 ページ ２００５年１１月１０日　木曜日　午後２時４９分

Содержание PCR-M30





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды