manualshive.com logo in svg

Edirol PCR-M30, Руководство пользователя

Поделиться
Скачать
Edirol PCR-M30 Скачать руководство пользователя страница 17

 

17

 

Getting Connected and Installing Drivers (Windows)

 

5

 

Click 

 

[OK]

 

 to close the 

 

System Properties

 

 dialog box.

 

6

 

Exit all currently running software.

Also close any open windows. If you are using virus checking or similar 
software, be sure to exit it as well.

 

7

 

Prepare the CD-ROM.

Insert the CD-ROM into the CD-ROM drive of your computer.

 

8

 

Click the Windows 

 

start

 

 button. From the menu that appears, select 

 

“Run...”

 

The 

 

“Run...”

 

 dialog box will appear.

 

fig.2-3_45

 

9

 

Specify the name of the file you 
want to execute.

Enter the following into the 

 

“Open”

 

 field, and click 

 

[OK]

 

.

 

(drive name): \Driver\USB_XP2K\SETUPINF.EXE

 

The 

 

SetupInf

 

 dialog box will appear.

You are now ready to install the driver.

 

* In the explanatory example shown here, the drive name is given as 

 

“D:.”

 

 The drive 

name 

 

“D:”

 

 may be different for your system. Specify the drive name of your CD-

ROM drive.

 

10

 

Use the USB cable to connect the PCR-M30/50/80 to your computer.

 

1.

 

With the power switch turned 

 

OFF

 

, connect the 

 

AC adaptor

 

 to the 

 

PCR-M30/50/80

 

.

 

2.

 

Connect the 

 

AC adaptor

 

 to an electrical outlet.

 

3.

 

Use the 

 

USB cable

 

 to connect the 

 

PCR-M30/50/80

 

 to your computer.

 

11

 

Set the PCR-M30/50/80’s 

 

power switch

 

 to the 

 

ON 

 

(DC) position.

Near the task bar, your computer will indicate 

 

“Found New Hardware.”

 

 

Please wait.

If the screen indicates 

“Windows can perform 

the same action each 

time you insert a disk or 

connect a device with 

this kind of file,” 

click 

[Cancel]

.

To check the drive name
Click the Start button, and 
choose My Computer from 
the menu that appears. In 
the window that appears, 
check the drive name of 

the CD-ROM drive

 

into which you inserted 
the CD-ROM in step 7.
The drive name is the (D:) 
or (E:) displayed by the 
CD-ROM drive.

Once the connections have 
been completed, turn on 
power to your various 
devices in the order 
specified. By turning on 
devices in the wrong 
order, you risk causing 
malfunction and/or 
damage to speakers and 
other devices.

This unit is equipped with 
a protection circuit. A brief 
interval (a few seconds) 
after power up is required 
before the unit will operate 
normally.

PCR-M30/50/80.book 17 ページ ２００５年１１月１０日　木曜日　午後２時４９分

Содержание PCR-M30





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды