88
Connecting your computer via USB (USB mode)
If you’ve connected the P-1 to your computer via a USB cable, you must shut down the USB
connection before you perform the following actions.
Windows Me/2000/XP users
fig.xp-1-1-e
1
Right-click the
shown in the taskbar at the lower
right of the screen.
A message of
“Safe to Remove Hardware”
or
“unplug
or eject hardware”
will appear. Left-click this message.
*
The screen and the message that appears will depend on
your operating system.
fig.xp-1-2-e
2
[Safe to Remove Hardware]
or
[unplug or eject
hardware]
wizard dialog box appears. Choose
USB
Mass Storage Device
, and click
[Stop]
.
fig.xp-1-3-e
3
The
[Stop a Hardware Device]
dialog box appears.
Choose
USB Mass Storage Device
, and click
[OK]
.
Shutting-down the USB connection
Avoid doing any of the following if you have not yet shut down the USB connection.
• If you’ve connectedChanging the connection destination between the P-1’s internal memory
and the inserted PC card
• Closing the USB mode screen
• Disconnecting the USB cable
• Powering off the P-1
• Powering off your computer
P-1_e.book 88 ページ ２００４年２月２４日 火曜日 午後７時５６分
