Edirol P-1 Скачать руководство пользователя

Страница: 115 / 124

115

MIDI Implementation

4. Supplementary Material (Receive)

4-1 Switching photos on the P-1

4-1-1. Switching photos on the P-1

(PHOTO CHANGE TRIGGER; NOTE)

Photos A1 through K8 are switched according to the note number of
the note-on message.

4-1-2. Switching photos on the P-1

(PHOTO CHANGE TRIGGER; NOTE RND)

The photo page is switched according to the note number and velocity
of the note-on message.
Photos are switched according to the velocity of the note-on message.
If a message of the note number specified for TRIGGER NOTE is
received, the photo page corresponding to the velocity value will be
selected.
If a message of other than the note number specified for TRIGGER
NOTE is received, photos will be randomly selected within the current
photo page according to the velocity value.

4-1-3. Switching photos on the P-1

(PHOTO CHANGE TRIGGER; PC)

The photo page is switched according to the bank select MSB bank
number.
Bank select LSB (controller number 32) is ignored.
Photos will be switched when the program change is received.
Photos within the current photo page will be switched according to
the program number of the program change message.

4-1-4. Switching photos on the P-1

(PHOTO CHANGE TRIGGER; CC)

Photos are switched when a message of the controller number
assigned to TRIGGER CC is received.
Photos A1 through K8 are switched according to the controller value.

4-2 Controlling the P-1’s TRANSITION

4-2-1. Switching the P-1’s MIX TYPE

vv = Control value:00H - 06H (OFF, MIX 1 - MIX 6)

The MIX type is switched when a message of the controller number
specified by the MIX CC assignment is received.
The power-up default setting for the MIX CC assignment is controller
number 80 (50H), general-purpose controller 5.

4-2-2. Switching the P-1’s WIPE type

vv = Control value:00H - 06H (OFF, WIPE 1 - WIPE 6)

The WIPE type is switched when a message of the controller number
specified by the WIPE CC assignment is received.
The power-up default setting for the WIPE CC assignment is
controller number 81 (51H), general-purpose controller 6.

4-2-3. Selecting the P-1’s TITLE

vv = Control value:00H - 50H (OFF, A1 - A4, B1 - B4, --- S1 - S4, T1 -
T4)

The TITLE is selected when a message of the controller number
specified by the TITLE CC assignment is received.
The power-up default setting for the TITLE CC assignment is
controller number 82 (52H), general-purpose controller 7.

4-2-4. Controlling the P-1’s TRANSITION TIME

vv = Control value:00H - 40H - 7FH (0.0 - 2.0 - 4.0 sec)

The TRANSITION TIME is controlled when a message of the
controller number specified by the TRANSITION TIME CC
assignment is received.
The power-up default setting for the TRANSITION TIME CC
assignment is controller number 5 (05H), portamento time.

4-2-5. Controlling the P-1’s VIDEO OUT

vv = Control value:00H, 40H (OFF, ON)

VIDEO OUT is controlled when a message of the controller number
specified by the VIDEO OUT CC assignment is received.
The power-up default setting for the VIDEO OUT CC assignment is
OFF.

4-3 Controlling MP3/SMF on the P-1

4-3-1. Starting MP3/SMF playback

MP3/SMF playback will start when a system realtime message Start
(FAH) or Continue (FBH) is received.

4-3-2 Stopping MP3/SMF playback

MP3/SMF playback will stop when a system realtime message Stop
(FCH) is received.

4-4 Controlling the P-1 via V-LINK

If you want to control the P-1 via V-LINK, you must transmit system
exclusive messages to the P-1 as shown in the example that follows.

In the example below, the system exclusive message has a device ID of 17 (10H).

❍

V-LINK ON/OFF

F0 41 10 00 51 12 10 00 00 01 6F F7

OFF