46
Applying effects to the image (TRANSITION)
fig.fs-wipe
2
In the touch panel, select (touch) the wipe type you
want to use.
As an example here, select (touch)
.
When you select a wipe type, the
[WIPE] button
will
turn on (lit), and you will return to the
Photo Play
mode
screen.
3
In the
Photo Play mode
screen, select (touch) a photo.
The photo appears on the P-1 and on the connected television.
4
Then select (touch) a different photo.
The wipe effect you selected is used to transition from the first photo to the second.
fig.k-time-lr
1
Turn
the photo transition time knob
(p. 17) to specify the length of time over
which the wipe effect will occur.
Turning the knob toward the right lengthens the time over which the photos will
switch (i.e., the change will occur more slowly). You can specify a time up to four
seconds.
fig.b-wipe
1
Press the
[WIPE] button
to turn it on/off.
When the
[WIPE] button
is lit, the Wipe effect is enabled.
When the
[WIPE] button
is not illuminated, the Wipe effect will not occur.
The Wipe effect may be less smooth if a WAV or MP3 file is being played.
Specifying the time for the Wipe effect
Turning the Wipe effect on/off
P-1_e.book 46 ページ ２００４年２月２４日 火曜日 午後７時５６分
