39
Other functions
Here’s how you can return various settings to their initial
state.
1.
Use the CURSOR [BWD] [FWD] buttons to
select “Initialize.”
The [SCENE] (ENTER) button will blink.
2.
Press the [SCENE] (ENTER) button.
The Initialize screen will appear.
fig.INIT-01
3.
Use the CURSOR [BWD] [FWD] buttons to
select the settings you want to initialize.
(*)
The effect type is not initialized; only the parameters
are initialized.
4.
Press [SCENE] (ENTER) button.
A confirmation message will appear in the screen.
fig.INIT-02
5.
To execute the initialization, press [SCENE]
(ENTER) button.
* If you decide to cancel, press the [DISPLAY] (EXIT) button.
When initialization is finished, the display will indicate
“COMPLETE.”
This operation will restore all settings, including the UTILITY
settings, to their factory-set state.
This is called “Factory Reset.”
1.
Turn the power off.
2.
While holding down the [FINALIZE] button and
[ROOM ACOUSTIC] button, press the [POWER]
switch to turn the power on.
The screen will indicate “Factory Reset” and the factory
reset will be executed.
After the factory reset is completed, the level meter
screen will appear.
Initializing the settings (Initialize)
Setting
Explanation
ALL
All settings of the M-10DX
* Except for UTILITY settings
Ins
Insert effect (*)
FX
Echo/reverb (*)
GEQ/RAC
Graphic equalizer/
Room Acoustic Control
Finalize
Finalize (*)
Scene
Scene
Restoring the factory settings
(Factory Reset)
