12
Names of things and what they do
M-10DX_Front.eps
1. SENS Knobs (channels 1–2)
Allow you to adjust the sensitivity as appropriate for the level
of the input signal.
2. Hi-Z Switch (channel 1)
When switched on (
), the corresponding LINE IN 1 jack
becomes a high-impedance jack, allowing an electric guitar to
be connected directly.
3. INSERTION FX Button
Press this when you want to edit the Insert Effect settings.
When you press the button it will light, and the Insert Effect
screen will appear.
➝
“Using the dedicated vocal/narration effect (Insert
Effect)” (p. 23)
For channels 1 and 2, you can independently select whether or
not the insert effect is to be used.
➝
“Turning the insert effect on/off independently” (p. 23)
4. EQ Knobs (HI, MID, LOW)
Provide for three-band equalization, with high, mid, and low
frequency controls for each channel.
The corresponding frequency range will be boosted when you
turn a knob toward the right, be cut when you turn it toward
the left, and made flat when the knob is in the center (U)
position.
When you turn a knob, the equalizer screen will appear in the
display, showing the current settings both numerically and
graphically.
fig.02-EQ.bmp
You can change the center frequency of the high, mid, and low
frequency ranges, and the width of the mid-frequency range
(MID Q).
➝
“Making detailed equalizer settings” (p. 22)
When you turn an EQ knob, the [SEL] button of that channel
will light.
5. PAN/BAL Butons
When you press this button so it’s lit, the PAN knobs/BAL
knobs will operate as knobs that adjust the pan or volume
balance, respectively.
The pan screen will appear in the display, showing the pan for
channels 1–2 and the volume balance of channels 3/4–5/6.
This is a convenient way to check the current pan and volume
balance setting of each channel.
fig.02-PAN-BAL
* Press the DISPLAY button to return to the level meter screen.
6. AUX/FX Button
If you press this button so it’s lit, the PAN/BAL knobs will
function in adjusting AUX levels.
* When the effect (FX) is on, turning an AUX/FX knob will
simultaneously adjust the AUX level as well as the effect depth of
the channel.
The display will show the AUX screen, indicating the AUX
level of each channel.
Front panel
Connector
Range of adjustment
MIC connector (XLR)
+10– +60 dB
LINE IN jack (TRS)
+10– -40 dBu
11
10
1
2
3
4
8
7
9
15
12
14
5
13
6
16
17
24
20
18
21
19
25
22
23
26
27
