background image

4

ENGLISH

SAFETY INFORMATION

•  The appliance is not designed for use by people, 

including children, with limited physical, sensory 
and mental capacities.

•  The appliance is not intended to be used for 

cooking.

•  The appliance is designed to burn UNI EN ISO 

17225-2 category A1 wood pellets, in the amounts 
and manner described in this manual.

•  The appliance is designed for use indoors, in 

normal conditions of ambient humidity.

•  Keep the product in a dry place out of the weather.
•  For the legal and company warranties, refer to 

the warranty certificate inside the product: neither 
Edilkamin nor the reseller are liable for damage 
resulting from incorrect installation or maintenance.

Safety risks

 

 may be caused by:

•  installation in unsuitable conditions. In particular, 

conditions of fire hazard. DO NOT INSTALL THE 
PRODUCT IN AREAS SUBJECT TO THE RISK OF 
FIRE.

•  contact with fire and hot parts (e.g. glass panel 

and pipes). DO NOT TOUCH THE STOVE’S HOT 
PARTS; always wear the provided gloves when 
working with the stove, even if switched off, when 
it is still hot. Failure do so can result in burns.

•  contact with live electrical equipment (internal). 

DO NOT ACCESS THE INTERNAL ELECTRICAL 
EQUIPMENT WHILE THE APPLIANCE IS 
POWERED ON. Electrocution hazard.

•  use of improper ignition aids (e.g. alcohol). DO 

NOT IGNITE OR BOOST THE FLAME WITH FLUID 
SPRAYS OR A FLAME TORCH. 

•  use of fuel other than wood pellets. DO NOT 

BURN WASTE MATTER, PLASTIC OR OTHER 
MATERIALS THAN WOOD PELLETS IN THE 
HEARTH. The product may be soiled, the flue may 
catch fire, and environmental damage may ensue.

•  cleaning the hearth when hot. DO NOT CLEAN 

THE HEARTH WITH A VACUUM CLEANER WHILE 
IT IS HOT. Risk of damage to the cleaner and 
smoke in the room.

•  cleaning the fumes duct with cleaning products. DO 

NOT CLEAN THE PRODUCT WITH FLAMMABLE 
PRODUCTS. Risk of fire and blowback.

•  cleaning the hot glass pane with unsuitable 

cleaning products. DO NOT CLEAN THE GLASS 
WHILE IT IS HOT WITH WATER OR ANY OTHER 
PRODUCT THAN THE RECOMMENDED GLASS 
CLEANING PRODUCTS. Risk of cracking and 
irreparable damage to the glass.

•  storing flammable materials within the safety 

clearance indicated in this manual. DO NOT 
PLACE LAUNDRY ON THE PRODUCT. DO NOT 
PLACE DRYING RACKS WITHIN THE SAFETY 
CLEARANCE. Keep flammable fluids away from 
the product. Fire hazard.

•  blocking the aeration vents and air intakes in the 

room. DO NOT BLOCK THE AERATION VENTS 
OR FLUE. Risk of smoke returning into the room 
with consequent damage and injury.

•  use of the product as a support or ladder. DO NOT 

CLIMB ONTO THE PRODUCT OR USE IT AS A 
SUPPORT. Risk of damage and injury.

•  use of the stove with the hearth open. DO NOT 

USE THE PRODUCT WITH ITS DOOR OPEN. 

•  incandescent material projected from the open 

door. DO NOT throw incandescent material 
outside the appliance. Fire hazard.

•  use of water in case of fire. CALL THE AUTHORITIES 

IF A FIRE BREAKS OUT.

Please use all normal precautions for a household 
heating appliance.

Connect the product to electricity supply only after 

having completed its assembly and mounted the 

cladding. Otherwise there is a risk of having “live” 
electrical parts exposed. 

If you have doubts, please do not take any action, but 
contact the retailer or the installer.

For reasons of safety, read the user instructions 
included in this manual.

Содержание NARA PLUS

































Отзывы: