background image

29

ENGLISH

MAINTENANCE

SEASONAL MAINTENANCE 
(implemented by the DEALER)

Clean the stove internally and externally

In the event of very frequent use of the 
oven, it is advised cleaning of the smoke 
passage duct and smoke channel every 3 
months. 

You should clean the chimney system at least once a 
year (check local regulations for details). 

If you fail to regularly clean and inspect the system, 
there is an increased risk of the chimney pot catching 
fire.

We remind you not to use compressed air during the 
seasonal maintenance for cleaning the air inlet pipe.

SUMMER SHUTDOWN

During the period of disuse, keep the stoves doors, 
hatches and lids closed.
We recommend emptying out the pellet tank.

SPARE PARTS

For any spare parts, contact your reseller or technician.
Using non-original spare parts may damage the 
appliance and relieves Edilkamin of all liability for 
damage resulting therefrom.

DISPOSAL

At the end of its service life, dispose of the product as 
required by regulations.
Deliver to the special recycling centres.

In accordance with art. 26 of Legislative Decree no. 
49 of 14th March 2014, “Implementation of Directive 
2012/19/UE on the disposal of electrical and electronic 
devices (RAEE)”.
The crossed-out dustbin symbol displayed on 
equipment or its packaging indicates that the product 
at the end of its life must be collected separately from 
other waste.
At the end of its useful life, the user should therefore 
deliver the product to a suitable local sorted collection 
centre for electrical and electronic devices.
Sorted collection for recycling, treatment and 
environmentally compatible scrapping contributes to 
the prevention of negative effects on the environment 
and health, and promotes the re-use and recycling of 
the materials of which the equipment is made.

 

 

 

 

 

 

 

 

Содержание NARA PLUS

































Отзывы: