EDI TSG-416, Руководство по обслуживанию

Страница: 24 / 228

TSG ‐ 416 GENERAL INFORMATION
01 ‐ 20
GENERAL SERVICE PROCEDURES
WARNING: TO AVOID THE POSSIBILITY OF
PERSONAL INJURY OR DAMAGE TO THE
EQUIPMENT, DO NOT OPERATE THE ENGINE UNTIL
THE FAN BLADE HAS BEEN EXAMINED FOR
POSSIBLE CRACKS AND SEPARATION.
NOTE:
Illustrations are typical and may not reflect your
particular engine. Specifications show the expected
minimum or maximum condition.
NOTE:
If a component fails to meet the specifications, it
is necessary to replace or refinish. If the component can
be refinished, wear limits are provided as an aid to
making a decision. Any component that fails to meet
specifications and cannot be refinished must be
replaced.
Camshaft Journal Diameter

Measure each camshaft journal diameter in two
directions.

If it is out of specification, replace as necessary.
Camshaft Journal Clearance
NOTE:
The camshaft journals must meet specifications
before checking camshaft journal clearance.

Measure each camshaft bearing in two
directions.

Subtract the camshaft journal diameter from the
camshaft bearing diameter
Camshaft Lobe Surface

Inspect camshaft lobes for pitting or damage in
the active area. Minor pitting is acceptable
outside the active area