EDI TSG-416, Руководство по обслуживанию

Страница: 146 / 228

TSG ‐ 416 COOLING SYSTEM
05 ‐ 10
Radiator Hose - Removal
WARNING: REFER TO CAUTIONS AND WARNINGS
AT THE BEGINNING OF THIS SECTION.
1. Drain the cooling system -- Refer to “Draining
the Cooling System” of this section.
2. Loosen the clamps at each end of the hose to
be removed.
3. Slide the hose off the radiator connection and
the engine water outlet connection.
Radiator Hose - Installation
1. Position the clamps at least 1/8 inch from each
end of the hose.
2. Coat the connection areas with an approved
water resistant sealer and slide the hose on the
connection.
NOTE:
Make sure the clamps are beyond the bead and
placed in the center of the clamping surface of the
connections.
3. Tighten the clamps.
4. Fill the system with coolant -- Refer to “Filling
the Cooling System” of this section.
5. Operate the engine for several minutes, then
check the hoses and connections for leaks