EDI iCITE DA-400, Инструкция по установке и эксплуатации

Страница: 9 / 45

iCITE
®
DA-Data Aggregator
®
DA-400™ and
iCITE ®
Installation Manual
Eberle Design Inc. Page
6
NOTE 1: Digital inputs are voltage based, and are referenced to the Logic Ground provided
on H7.
NOTE 2: Typical input impedance is 150K Ohm.
NOTE 3: Each input pin can have a pull-up resistor connected by applying a pull-up voltage
(typically 12VDC or 24VDC) to the associated Pull up VREF pin.
DA-500E H-5 (Digital DC Inputs)
Pin WIRE
MARKING
WIRE
COLOR
TYPICAL
VOLTAGE
RANGE
MAXIMUM
VOLTAGE
RANGE
THRESHOLD Pull up
Power
Pin
FUNCTION
A1 DETECTOR9 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF2 Input from detector
output 9
A2 DETECTOR10 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF2 Input from detector
output 10
A3 DETECTOR11 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF2 Input from detector
output 11
A4 DETECTOR12 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF2 Input from detector
output 12
A5 DETECTOR13 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF2 Input from detector
output 13
A6 DETECTOR14 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF2 Input from detector
output 14
A7 DETECTOR15 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF2 Input from detector
output 15
A8 DETECTOR16 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF2 Input from detector
output 16
A9 VREF2 RED 12 OR 24
VDC
0-62 VDC Reference pull up
voltage for Detectors 9-
16
A10 - - (internally connected to
logic ground
A11 PED3 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF3 Input from Ped Isolator 3
A12 PED4 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF3 Input from Ped Isolator 4
B1 DETECTOR1 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF1 Input from detector
output 1
B2 DETECTOR2 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF1 Input from detector
output 2
B3 DETECTOR3 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF1 Input from detector
output 3
B4 DETECTOR4 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF1 Input from detector
output 4
B5 DETECTOR5 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF1 Input from detector
output 5
B6 DETECTOR6 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF1 Input from detector
output 6
B7 DETECTOR7 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF1 Input from detector
output 7
B8 DETECTOR8 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF1 Input from detector
output 8
B9 VREF1 RED 12 OR 24
VDC
0-62 VDC Reference pull up
voltage for Ped 1-4
B10 VREF3 RED 12 OR 24
VDC
0-62 VDC Reference pull up
voltage for Detectors 1-4
B11 PED1 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF3 Input from Ped Isolator 1
B12 PED2 BLUE 0-28 VDC 0-120 VDC 2.5, 3, 6, 12 V VREF3 Input from Ped Isolator 2
Table 1 H-5 Harness Inputs