7
1. To install the CO
2
gas line tube to the regulator, attach one end of the CO
2
tube, to the
hose barb connection on the CO
2
regulator. Secure the tube by using one of the two self-
locking red plastic snap-on clamps. With a pair of pliers or a clamp crimper, snap the red
clamp on tightly. This ensures that there are no leaks.
2. Remove the plug located at the exterior back. Save it for later in case you decide to
convert the unit into an “all refrigerator.” Run the other end of the CO
2
tubing through the
open hole through the inside of the cabinet.
3. Insert a washer (if provided in the kit) into the regulator to cylinder attachment nut. This
step is only required if the regulator does not have a gasket.
4. Make sure the CO
2
tank is full and that the valve is closed. Now attach the CO
2
regulator
to the CO
2
cylinder by screwing the loose golden regulator nut into the CO
2
cylinder
valve and tighten with an adjustable wrench.
5. To mount the CO
2
cylinder holder to the cabinet, simply match up the holes on the holder
with the four screws protruding out of the back of the unit, and push down to lock the
holder in place. Position the CO
2
cylinder in the holder in a manner that you would be
able to read the numbers on the gauges and have easy access to the shut-off valve. Note
that the CO
2
cylinder holder is designed to fit CO
2
cylinders with up to 5 pounds in
capacity. Smaller and larger CO
2
cylinders are acceptable for use as well.
Connecting the CO
2
Cylinder to the CO
2
Regulator and
Installing the CO
2
Cylinder Holder
Warning
CO
2
can be dangerous!
CO
2
cylinders contain high-pressured gas, which can be
hazardous if handled improperly. Please handle with care.
Note: your CO
2
cylinder is shipped empty. When you purchase your first keg of beer, have
your beer distributor fill the CO
2
cylinder. If they are unable to recommend a company, another
option is to look in your phone book under Fire Extinguishers or Fire and Safety Equipment;
companies that refill fire extinguishers are typically willing to to fill CO
2
cylinders. Although
price will vary with each market area, the average cost for filling a 5 Lb CO
2
gas cylinder is
$14.
Note
This section describes general CO
2
and keg installation. For specific
instructions, see the instructions included in the accessory box.
Содержание BR2000BL
Страница 1: ......