5
1. With the contents inside the cabinet removed set the beer dispenser on its side.
2. Insert each caster into the holes on the bottom corners of the cabinet. Screw the casters
in hand tight.
3. With all four casters tightened evenly, stand the unit in an upright position.
Note
: Allow the refrigerator to stand in an upright position for 8 hours before turning on the power.
This will ensure that the coolant has settled.
•
This appliance’s plug must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least resistance for
electrical current.
•
Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not
under any circumstances, cut or remove the third (ground) prong from the power cord.
Any questions concerning power and/or grounding should be directed toward a certified
electrician.
•
This appliance requires a standard 110~120 volt, 60Hz electrical outlet with three-prong
ground.
•
Do not use outlet adaptors if unit. No other appliance should be plugged into the same
outlet. Be sure that the plug is fully inserted into the outlet.
The temperature control is located inside the unit in the upper left-hand corner. After turning the
unit on, you must wait 24 hours for the unit to cool properly. You may then adjust the temperature
setting based on your needs and preferences.
It is not usually necessary to defrost the beer dispenser. Ice that has deposited on the evaporator
is automatically defrosted when the compressor cycles off. The defrosted water collects in the
water drip tray located on the top of the compressor in the rear of the unit and evaporates.
However, if the door is often opened or you are using the unit in a humid area, excessive ice may
build up on the evaporator. In this case, turn off the unit and allow the ice to melt once your keg is
empty. Be careful to soak up the excess water with a towel.
SETTING UP YOUR FRIDGE & BEER DISPENSER
Grounding Instructions
Understanding the Temperature Control Setting
Automatic Defrosting
Installing the Casters
Содержание BR2000BL
Страница 1: ......