EdgeStar BR2000BL Скачать руководство пользователя страница 2

1

 

SAFETY PRECAUTIONS  

Read all of the instructions before using this appliance. When using 
this appliance, always exercise basic safely precautions, including the 
following: 

  This appliance is designed for household use only and not for commercial use. 

Do not use the appliance for uses other than that for which it is designed. 

  Do not use the appliance if the power supply cord is damaged. If the power 

supply cord is damaged, it must be replaced by a qualified technician. 

  This unit is designed to function on 115 Volts/ 60 Hz (110/115/120 Volts 

acceptable) electrical circuits. 

  This appliance is not designed for children. Never allow unattended children to 

use this appliance. 

  Unplug the appliance if it will not be used for an extended period of time. 

  Unplug the appliance prior to cleaning. 

  Set the appliance on a level surface away from direct sunlight and other heat 

sources. 

  This appliance is designed to function optimally in room temperature 

environments (mid 70°s Fahrenheit). 

  Do not move the unit while it is full. 

  The power supply cord must be grounded. 

  Never pull the power supply cord directly to disconnect the appliance. Always pull 

the plug out of the socket. 

  Never lift the appliance by the power supply cord or the dispensing tap. 

  Keep the power supply cord away from heating surfaces. 

  Service only by authorized technicians. 

  Do not immerse the appliance or its power supply cord in water or any other 

liquid. 

  Do not cover the appliance or place anything on it.  

  Do not insert any objects into the ventilation holes.  

  Only use approved CO

2

 cylinders. Make sure you read and understand all the 

procedures for the CO

cylinders before installation.  

  Cylinders contain pressurized CO

2

. Keep them away from heat, and store in a 

dry and cool place. CO

cylinders should always be connected to a regulator! 

Failure to do so may cause an explosion resulting in possible death or injury 
when the cylinder valve is opened. 

  Do not dispose of empty CO

cylinders in a fire. Never drop or throw a CO

cylinder. 

  Clean this appliance regularly, and after every keg. 

  If you are replacing an older appliance with this unit, take care to remove the 

door of the old appliance before throwing it away. This will alleviate the risk of 
child entrapment. 

 
 
 
 
 

 

Содержание BR2000BL



















Отзывы: