Edge-Core WA6202A, Руководство пользователя

Страница: 82 / 332

6
System Configuration
• Multiple IP: Specifies an address range as defined by the entered IP address and
subnet mask. For example, IP address 192.168.1.6 and subnet mask
255.255.255.0, defines all IP addresses from 192.168.1.6 to 192.168.1.254.
CLI Commands for AP Management features.
Enterprise AP(config)#apmgmtip multiple 192.168.1.6 255.255.255.0 7-21
Enterprise AP(config)#apmgmtui SNMP enable 7-22
Administration
Changing the Password
Management access to the web and CLI interface on the access point is controlled
through a single user name and password. You can also gain additional access
security by using control filters (see “Filter Control” on page 6-17).
To protect access to the management interface, you need to configure an
Administrator’s user name and password as soon as possible. If the user name and
password are not configured, then anyone having access to the access point may
be able to compromise access point and network security. Once a new Administrator
has been configured, you can delete the default “admin” user name from the system.
Username – The name of the user. The default name is “admin.” (Length: 3-16
characters, case sensitive)
New Password – The password for management access. (Length: 3-16 characters,
case sensitive)
Confirm New Password – Enter the password again for verification.
CLI Commands for the Administrator’s User Name and Password – Use the
username and password commands from the CLI configuration mode.
Enterprise AP(config)#username bob 7-15
Enterprise AP(config)#password admin 7-15
Enterprise AP#
6-28