Edge-Core WA6202A, Руководство пользователя

Страница: 102 / 332

6
System Configuration
Configuring SNMPv3 Trap Filters
SNMP v3 users can be configured to receive notification messages from the access
point. An SNMP Target ID is created that specifies the SNMP v3 user, IP address,
and UDP port. A user-defined notification filter can be created so that specific
notifications can be prevented from being sent to particular targets.
The access point allows up to 10 notification filters to be created. Each filter can be
defined by up to 20 MIB subtree ID entries.
To configure a new notification filter, click the New button. A new page opens to
configure the filter (see below). To edit an existing filter, select the radio button next to
the entry in the table and then click the Edit button. To delete a filter, select the radio
button next to the entry in the table and then click the Delete button.
When you click on the New button in the SNMP Trap Filters page, a new page opens
where the filter parameters are configured. Define a filter name and subtree ID to be
filtered. Select the filter type, include or exclude, from the drop-down list. Click Apply
to create the filter.
6-48