Edge-Core WA6202A, Руководство пользователя

Страница: 163 / 332

show line
System Management Commands
7
This command displays the console port’s configuration settings.
Command Mode
Exec
Example
The console port settings are fixed at the values shown below.
Enterprise AP#show line
Console Line Information
======================================================
databits : 8
parity : none
speed : 9600
stop bits : 1
======================================================
Enterprise AP#
System Management Commands
These commands are used to configure the user name, password, system logs,
browser management options, clock settings, and a variety of other system
information.
Table 7-4. System Management Commands
Command Function Mode Page
Country Setting
country Sets the access point country code Exec 7-12
Device Designation
prompt Customizes the command line prompt GC 7-14
system name Specifies the host name for the access point GC 7-14
snmp-server contact Sets the system contact string GC 7-41
snmp-server location Sets the system location string GC 7-42
Management Access
username Configures the user name for management access GC 7-15
password Specifies the password for management access GC 7-15
ip ssh-server enable Enables the Secure Shell server IC-E 7-16
ip ssh-server port Sets the Secure Shell port IC-E 7-16
ip telnet-server enable Enables the Telnet server IC-E 7-17
APmgmtIP Specifies an IP address or range of addresses allowed
access to the management interface
GC 7-21
APmgmtUI
Enables or disables SNMP, Telnet or web management
access
GC 7-22
show APmanagement Shows the AP management configuration Exec 7-22
7-11