Edge-Core OAP100, Быстрое руководство по установке

Страница: 4 / 15

Quick Installation Guide
OAP100 Access Point ENGLISH
iii
Professional installation instruction
1. Installation personal
This product is designed for specific application and needs to be installed by a qualified personal who has
RF and related rule knowledge. The general user shall not attempt to install or change the setting.
Professional installation is required.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept 129 cm from nearby
person in normal operation condition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may
produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC
limit and is prohibited. The antenna must be installed completely perpendicular to the horizon for
compliance with FCC Rule Part 15.407(a)(1)(i).
4. Installation procedure
Please refer the handbook for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output power does not exceed
the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty.
CE CAUTION
Hereby, Edgecore Networks Corporation. declares that the radio equipment type OAP100 is in
compliance with Directive
2014/53/EU.
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
Input Power
Power from PoE: IEEE802.3at
Operation Temperature
-20
℃
(-4
℉
) to 65
℃
(149
℉
)
Model
– OAP100
The device has been tested and passed the requirements of the following standards, and hence fulfills the
EMC and safety requirements of RED within the CE marking requirement.