Edge-Core OAP100, Быстрое руководство по установке

Страница: 14 / 15

Quick Installation Guide
OAP100 Access Point ENGLISH
9
Getting Started
Edgecore OAP100 supports web-based configuration. Upon the completion of hardware installation, Access
Point can be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet
Explorer version 6.0 and above.
The default values of LAN IP address and subnet mask of OAP100 are:
IP Address
192.168.1.10
Subnet Mask 255.255.255.0
Steps:
1. To access the web management interface, connect the administrator PC to the LAN port of OAP100 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as OAP100 in TCP/IP of your
PC, such as the following example:
IP Address : 192.168.1.100
Subnet Mask : 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of OAP100 ( http://192.168.1.10 ) at the
address field, and then press Enter .
Example of entering OAP100
’s default IP Address via a web browser
3. The following Admin Login Page will appear. Enter
“admin”
for both the Username and Password fields,
and then click Login .