Edge-Core ES4612 Скачать руководство пользователя страница 617

Страница: 617 / 666

Multicast Routing Commands

4-303

show ip dvmrp neighbor

This command displays all of the DVMRP neighbor routers.

Command Mode

Normal Exec, Privileged Exec

Example

show ip dvmrp interface

This command displays the DVMRP configuration for interfaces which have enabled
DVMRP.

Command Mode

Normal Exec, Privileged Exec

Example

Console#show ip dvmrp neighbor

Address Interface Uptime Expire Capabilities
---------------- --------------- -------- -------- -------------
10.1.0.254 vlan1 79315 32 6
Console#

Table 4-104 show ip dvmrp neighbor - display description

Field

Description

Address

The IP address of the network device immediately upstream for this multicast delivery tree.

Interface

The IP interface on this router that connects to the upstream neighbor.

Uptime

The time since this device last became a DVMRP neighbor.

Expire

The time remaining before this entry will be aged out.

Capabilities

The neighboring router’s capabilities may include:
Leaf (bit 0) -

Neighbor has only one interface with neighbors.

Prune (bit 1) -

Neighbor supports pruning.

Generation ID (bit 2) - Neighbor sends its Generation ID in probe messages.

Mtrace (bit 3) -

Neighbor can handle multicast trace requests.

SNMP (bit 4) -

Neighbor is SNMP capable.

Netmask - (bit 5) -

Neighbor will accept network masks appended to the prune,

graft, and graft acknowledgement messages.

Reserved (bit 6 and 7) - Reserved for future use.

Console#show ip dvmrp interface
Vlan 1 is up
DVMRP is enabled
Metric is 1

Console#

Содержание ES4612



























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4612

Отзывы:

Edge-Core ES4612, Руководство по управлению, Страница: 617 / 666

Результаты поиска

Содержание ES4612

Отзывы: