Edge-Core ES4612 Скачать руководство пользователя страница 422

Страница: 422 / 666

Command Line Interface

4-108

show access-list mac mask-precedence

This command shows the ingress or egress rule masks for MAC ACLs.

Syntax

show access-list mac mask-precedence

[

out

]

•

– Ingress mask precedence for ingress ACLs.

•

out

– Egress mask precedence for egress ACLs.

Command Mode

Privileged Exec

Example

Related Commands

mask (MAC ACL) (4-106)

mac access-group

This command binds a port to a MAC ACL. Use the

form to remove the port.

Syntax

mac access-group

acl_name

{

out

}

•

acl_name

– Name of the ACL. (Maximum length: 16 characters)

•

– Indicates that this list applies to ingress packets.

•

out

– Indicates that this list applies to egress packets.

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

Command Usage

• A port can only be bound to one ACL.
• If a port is already bound to an ACL and you bind it to a different ACL, the

switch will replace the old binding with the new one.

• You must configure a mask for an ACL rule before you can bind it to a port.

Example

Console#show access-list mac mask-precedence
MAC egress mask ACL:
mask pktformat host any vid ethertype
Console#

Console(config)#interface ethernet 1/2
Console(config-if)#mac access-group jerry in
Console(config-if)#

Содержание ES4612



























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4612

Отзывы:

Edge-Core ES4612, Руководство по управлению, Страница: 422 / 666

Результаты поиска

Содержание ES4612

Отзывы: