Edge-Core ES4612 Скачать руководство пользователя страница 514

Страница: 514 / 666

Command Line Interface

4-200

protocol-vlan protocol-group

(Configuring Groups)

This command creates a protocol group, or to add specific protocols to a group. Use
the

form to remove a protocol group.

Syntax

protocol-vlan protocol-group

group-id

[{

add

remove

}

frame-type

frame

protocol-type

protocol

]

no protocol-vlan protocol-group

group-id

•

group-id

- Group identifier of this protocol group. (Range: 1-2147483647)

•

frame

- Frame type used by this protocol. (Options: ethernet, rfc_1042,

snap_8021h, snap_other, llc_other)

•

protocol

- Protocol type. The only option for the llc_other frame type is

ipx_raw. The options for all other frames types include: ip, arp, rarp.

Default Setting

No protocol groups are configured.

Command Mode

Global Configuration

Example

The following creates protocol group 1, and specifies Ethernet frames with IP and
ARP protocol types:

protocol-vlan protocol-group

(Configuring Interfaces)

This command maps a protocol group to a VLAN for the current interface. Use the

form to remove the protocol mapping for this interface.

Syntax

protocol-vlan protocol-group

group-id

vlan

vlan-id

no protocol-vlan protocol-group

group-id

vlan

•

group-id

- Group identifier of this protocol group. (Range: 1-2147483647)

•

vlan-id

- VLAN to which matching protocol traffic is forwarded.

(Range: 1-4094)

Default Setting

No protocol groups are mapped for any interface.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Console(config)#protocol-vlan protocol-group 1 add frame-type ethernet

protocol-type ip

Console(config)#protocol-vlan protocol-group 1 add frame-type ethernet

protocol-type arp

Console(config)#

Содержание ES4612



























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4612

Отзывы:

Edge-Core ES4612, Руководство по управлению, Страница: 514 / 666

Результаты поиска

Содержание ES4612

Отзывы: