Edge-Core ES4612 Скачать руководство пользователя страница 496 | Manualshive

Страница: 496 / 666

Edge-Core ES4612 Скачать руководство пользователя страница 496

Command Line Interface

4-182

4

Example

Related Commands

spanning-tree portfast (4-182)

spanning-tree portfast

This command sets an interface to fast forwarding. Use the

no

form to disable fast

forwarding.

Syntax

[

no

]

spanning-tree

portfast

Default Setting

Disabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

• This command is used to enable/disable the fast spanning-tree mode for the

selected port. In this mode, ports skip the Discarding and Learning states, and
proceed straight to Forwarding.

• Since end-nodes cannot cause forwarding loops, they can be passed through

the spanning tree state changes more quickly than allowed by standard
convergence time. Fast forwarding can achieve quicker convergence for
end-node workstations and servers, and also overcome other STA related
timeout problems. (Remember that fast forwarding should only be enabled for
ports connected to a LAN segment that is at the end of a bridged LAN or for
an end-node device.)

• This command is the same as

spanning-tree edge-port

, and is only included

for backward compatibility with earlier products. Note that this command may
be removed for future software versions.

Example

Related Commands

spanning-tree edge-port (4-181)

Console(config)#interface ethernet ethernet 1/5
Console(config-if)#spanning-tree edge-port
Console(config-if)#

Console(config)#interface ethernet 1/5
Console(config-if)#bridge-group 1 portfast
Console(config-if)#

«
...
494
495
496
497
498
...
»

Содержание ES4612



























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов