Edge-Core ES3526VA-PoE, Руководство по установке, Страница: 35 / 74

Mounting
3-3
3
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the following equipment available:
• Four mounting screws for each device you plan to install in a rack—these are not
included
• A screwdriver (Phillips or flathead, depending on the type of screws used)
Mounting
This switch can be mounted in a standard 19-inch equipment rack or on a desktop or
shelf. Mounting instructions for each type of site follow.
Rack Mounting
Before rack mounting the switch, pay particular attention to the following factors:
• Temperature: Since the temperature within a rack assembly may be higher than the
ambient room temperature, check that the rack-environment temperature is within
the specified operating temperature range. (See page C-2.)
• Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.
• Circuit Overloading: Be sure that the supply circuit to the rack assembly is not
overloaded.
• Grounding: Rack-mounted equipment should be properly grounded. Particular
attention should be given to supply connections other than direct connections to the
mains.
To rack-mount devices:
1. Attach the brackets to the device using the screws provided in the Bracket
Mounting Kit.
Figure 3-2 Attaching the Brackets
26
25
ES3526V
A-PoE
Link/A
ct
PoE
25
26
Pwr
Diag
Stac
k
Mod
e PoE
/Lin
k
RPS