Edge-Core ECS3510-10PD Скачать руководство пользователя страница 393

Страница: 393 / 1494

HAPTER

| Security Measures

Configuring 802.1X Port Authentication

– 393 –

OMMAND

SAGE

◆

When the switch functions as a local authenticator between supplicant

devices attached to the switch and the authentication server, configure

the parameters for the exchange of EAP messages between the

authenticator and clients on the Authenticator configuration page.

◆

When devices attached to a port must submit requests to another

authenticator on the network, configure the Identity Profile parameters

on the Configure Global page (see

"Configuring 802.1X Global Settings"

on page 391

) which identify this switch as a supplicant, and configure

the supplicant parameters for those ports which must authenticate

clients through the remote authenticator (see

"Configuring

Port Supplicant Settings for 802.1X" on page 396

◆

This switch can be configured to serve as the authenticator on selected

ports by setting the Control Mode to Auto on this configuration page,

and as a supplicant on other ports by the setting the control mode to

Force-Authorized on this page and enabling the PAE supplicant on the

Supplicant configuration page.

ARAMETERS

These parameters are displayed:

◆

Port

– Port number.

◆

Status

– Indicates if authentication is enabled or disabled on the port.

The status is disabled if the control mode is set to Force-Authorized.

◆

Authorized

– Displays the 802.1X authorization status of connected

clients.

■

Yes

– Connected client is authorized.

■

N/A

– Connected client is not authorized, or port is not connected.

◆

Control Mode

– Sets the authentication mode to one of the following

options:

■

Auto

– Requires a dot1x-aware client to be authorized by the

authentication server. Clients that are not dot1x-aware will be

denied access.

■

Force-Authorized

– Forces the port to grant access to all clients,

either dot1x-aware or otherwise. (This is the default setting.)

■

Force-Unauthorized

– Forces the port to deny access to all

clients, either dot1x-aware or otherwise.

◆

Operation Mode

– Allows single or multiple hosts (clients) to connect

to an 802.1X-authorized port. (Default: Single-Host)

■

Single-Host

– Allows only a single host to connect to this port.

■

Multi-Host

– Allows multiple host to connect to this port.

Содержание ECS3510-10PD























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS3510-10PD

Отзывы:

Похожие инструкции для ECS3510-10PD

Бренды по названию

Популярные бренды

Edge-Core ECS3510-10PD, Руководство по управлению

Результаты поиска

Содержание ECS3510-10PD

Отзывы:

Похожие инструкции для ECS3510-10PD

Бренды по названию

Популярные бренды