Edge-Core ECS3510-10PD, Руководство по управлению

Страница: 1107 / 1494

C
HAPTER
34
| ERPS Commands
– 1107 –
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
ERPS Configuration
C
OMMAND
U
SAGE
◆
If this command is used to monitor the link status of an ERPS node with
CFM continuity check messages, then the MEG level set by the meg-
level command must match the authorized maintenance level of the
CFM domain to which the specified MEP belongs.
◆
To ensure complete monitoring of a ring node, use the mep-monitor
command to specify the CFM MEPs used to monitor both the east and
west ports of the ring node.
◆
If CFM determines that a MEP node which has been configured to
monitor a ring port with this command has gone down, this information
is passed to ERPS, which in turn processes it as a ring node failure. For
more information on how ERPS recovers from a node failure, refer to
"Ethernet Ring Protection Switching" on page 497 .
E
XAMPLE
Console(config-erps)#mep-monitor east mep 1
Console(config-erps)#
R
ELATED
C
OMMANDS
ethernet cfm domain (1333)
ethernet cfm mep (1337)
node-id
This command sets the MAC address for a ring node. Use the no form to
restore the default setting.
S
YNTAX
node-id mac-address
mac-address – A MAC address unique to the ring node. The MAC
address must be specified in the format xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxx.
D
EFAULT
S
ETTING
CPU MAC address
C
OMMAND
M
ODE
ERPS Configuration
C
OMMAND
U
SAGE
◆
The ring node identifier is used to identify a node in R-APS messages
for both automatic and manual switching recovery operations.