Edge-Core ECS3510-10PD, Руководство по управлению

Страница: 1116 / 1494

C
HAPTER
34
| ERPS Commands
– 1116 –
No R-APS messages are inserted or extracted by other rings or sub-
rings at the interconnection nodes where a sub-ring is attached. Hence
there is no need for either additional bandwidth or for different VIDs/
Ring IDs for the ring interconnection. Furthermore, protection switching
time for a sub-ring is independent from the configuration or topology of
the interconnected rings. In addition, this option always ensures that
an interconnected network forms a tree topology regardless of its
interconnection configuration. This means that it is not necessary to
take precautions against forming a loop which is potentially composed
of a whole interconnected network.
Figure 418: Sub-ring without Virtual Channel
E
XAMPLE
Console(config-erps)#raps-without-vc
Console(config-erps)#
ring-port
This command configures a node’s connection to the ring through the east
or west interface. Use the no form to disassociate a node from the ring.
S
YNTAX
ring-port { east | west } interface interface
east - Connects to next ring node to the east.
west - Connects to next ring node to the west.
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
D
EFAULT
S
ETTING
Not associated
C
OMMAND
M
ODE
ERPS Configuration
Sub-ring
with Virtual
Channel
RPL Port
Interconnection Node
Ring Node
Major Ring