Edesa ISM-35, Руководство пользователя

Страница: 5 / 8

5
OPERATION INSTRUCTION
Turn on the power.
1. Plug power cord into 230V, 50Hz power socket.
2. Turn on power by two action: 1. Push power on/off key. 2. Push “+” key or rotary the
power control knob within 5 seconds, power level display led will light on.
Start cooking on induction range. (Heat Function)
1. Rotary power control knob clockwise, the power level led will display from step.1 to
step.19.
2. Put a suitable pan on central position of top plate, and rotate power control knob to desire
power level. Power at 1 position is the minimum, 19 position is the maximum.
3. Heating indicator light will indicates the pan is suitable or not. If the Heating indicator light
is on, then the pan is heating. If the Heating indicator light is off, It indicates no pan or no
suitable pan is on top plate position.
4. This unit is equipped with 'over heating protection device', which will stop power
temporally when top plate temperature reaches 250
°
c (+/- 20
°
c). The power will start
again automatically when the temperature of top plate reduced. If you put an empty pan
on it, and heat-up at max. Power, it will reach 250
°
c very soon. So, the safety device will
stop output power temporarily to prevent over-heating. Under this situation, the Heating
indicator light will flash to indicate the over heating protection function is on.
Keep food at certain temperature (Warm Function)(Holding Temperature)
1. Warm function (Temperature holding function): Push “Heat / Warm” function select
key, the temperature holding function will be activate. The Function indicate LED
(Warm) will start flashing. And the Status display window will display the temperature
you want to hold. For example, when the Status display window show 190, it’s mean
you want to hold the cooking pan’s temperature at 190
°
C .
2. At the beginning of Warm Function activate, the “Warm” function indicate LED will
flashing, it’s mean the temperature of cooking pan is not yet reach the setting
temperature. After a while, the “Warm” function indicate LED light will stop flashing,
and it keep turn on, it’s mean the temperature are reached the setting temperature.
3. You can change the setting temperature by push “+” or “--“ keys. To increase the
setting temperature, push “+”. Or decrease the setting temperature by push “--“ key.
The temperature setting range is from 50
°
C - 240
°
C / 10
°
C per step.
4. You can change the WARM function to HEAT function by push “Heat / Warm”
Function key again.