EN
Using the Pause function – Stop&Go (F2)
Pause function can be used at any time during cooking. It allows to stop the induction
hob and come back to it keeping all the settings.
1. Make sure that the cooking zone is working.
2. Touch the Stop&Go (8). All the cooking zone displays will show “=”. The operation
of the induction hob will be deactivate except the Stop&Go (8), ON/OFF (2) and
Keylock (1).
3. To cancel the pause status, touch Stop&Go (8), then the cooking zones will go back
to the power level which you set before.
Keylock (child safety feature)
• You can lock the keys to prevent unintended use (for example children accidentally
turning the cooking zones on).
To lock the keys
Touch the Keylock (1). The timer display will show “Lo“.
To unlock the keys
1. Make sure the induction hob is turned on.
2. Touch and hold the Keylock (1) for a while.
3. You can now start using your induction hob.
When the hob is in the lock mode, all the keys are disabled except the ON/
OFF (2) and Keylock (1). You can always turn the induction hob off with
the ON/OFF (2) in an emergency, but you shall unlock the hob first in the
next operation.
Over-Temperature Protection
A temperature sensor is monitoring the temperature inside the induction hob. When an
excessive temperature is detected, the induction hob will stop operation automatically.
Detection of Small Articles
When undersized or non-magnetic cookware (e.g. aluminium), or some other small
items (e.g. knife, fork, key) has been left on the hob, the hob will automatically go
to standby mode in 1 minute. The fan will keep cooking down the induction hob for a
further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function. It shuts down the cooking zone
automatically if you ever forget to turn it off. The default maximum working time for
each power level is shown in the table below:
Power level
1~3
4~6
7~8
9
Default working timer (hour)
360
180
120
90
When the cookware is removed, the display shows the power level during 5s and
then displays for 1 minute. After that it will display “H”, which means the surface of
cook zone is hot. Please do not touch it. When the surface has cooled down to a safe
temperature, it will display “-” for 1 minute, then the zone will automatically switch off.
Содержание EIR-6331 B
