Advanced Photo Catalytic
Both the Advanced Photo Catalytic (PCO) and Scalable Oxidation work to destroy biological contaminants as
well as odors, mold, bacteria and viruses. PCO Cells have been proven to reduce dangerous pathogens by more
than 99% in less than 24 hours through a process called molecular disassociation, which actually breaks down the
molecules instead of simply covering up the source.
Scalable Oxidation ensures your OxiLeaf® XL100 will perform at the maximum efficiency specific to its
environment at the time of use. In High Mode, the purification plate generates activated oxygen to assist in
breaking down contaminates which cause odors. For faster clean-up, the OxiLeaf® XL100 can be set to Sani +
Booster, which has a programmable auto-shutoff timer feature. This allows the machine to generate maximum
output when the room or home is unoccupied.
Tools Required
You will need a #2 Phillips screwdriver.
Workspace Recommendations
A countertop or flat surface is ideal for disassembling/assembling your unit. It is recommended to use a small bowl
or cup to hold any screws so they are not lost during the disassembly/assembly process.
Disassembly Instructions
• Turn the unit off.
• Remove the Power Cord from the wall and rear of the unit.
• Clean the exterior of the unit if necessary.
Removing the Rear Cover
• Using your screwdriver, remove the Rear Cover Screw from the Rear Cover (above the Power Cord Port). Place
the Rear Cover Screw where you will find it easily during reassembly.
• Squeeze the tabs on both sides of the Rear Cover (where the grooves are) until they release and tilt the Rear
Cover upwards until the top tab releases. Clean with compressed air or a damp cloth. Set the Rear Cover aside.
Removing the Filter Assembly
• Remove Brass Thumbscrews from the top corners of the Filter Assembly. Place the Brass Thumbscrews where
you will find them easily during reassembly.
• Grasp the top of the Filter Assembly and tilt it away from the unit. Clean if necessary and set it aside.
Removing the Purification Plate
Grasp the Purification Plate on the ceramic and gently pull it out of the grooves on the sides. Clean it and
set it aside.
Removing the PCO Cell
• Locate the PCO Cell Power Connector on the right and rear of the unit (beside the Purification Plate slot).
Squeeze the tabs on the top and bottom of the PCO Cell Power Connector and pull gently until it’s free from the
PCO Cell Power Connector Outlet.
• Remove the Thumb Nuts from the Screw Posts on the right and left below the PCO Cell. Place them where you
will find them easily during reassembly.
• Gently slide the PCO Cell out of the unit. Clean it and set it aside. Clean the interior of the unit.
Electrostatic Filtration
An advanced electrostatic filter is included with the OxiLeaf® XL100 to help keep the unit clean while at the same
time filtering out particles. Unlike expensive HEPA filters, the electrostatic filter is washable and can be used over
and over again.
Needlepoint Ionization
The OxiLeaf® XL100 generates a continuous steam of millions of negative ions that circulate throughout the home.
These ions charge particles, such as dust, dander or bacteria, causing them to attract other particles and clump
together. As more and more particles come together, they become heavier, making them easier to pull into your
home’s HVAC air filter or just fall to the floor to be vacuumed up. Unlike HEPA filters that can only filter out
particles of .5 microns or larger, the ionizer in the OxiLeaf® XL100 can reduce ultra-fine, even nano particles, that
are much more dangerous than the larger particles you actually see.
Scalable Purification
The OxiLeaf® XL100 can be easily adjusted to the preferred purification setting for your home. Using these setting
provides optimum performance and comfort. In High Mode, the purification plate generates activated oxygen to
assist in breaking down pollutants which cause odors. For faster sanitization, the OxiLeaf® XL100 can be set to
Away Mode, which if equipped with an auto shut-off timer and can be used for maximum output when the room
or home is unoccupied.
The EdenPURE
®
OxiLeaf
®
XL100 Four Technologies
Disassembly
