7
OPERATING INSTRUCTIONS
1. Start and select working mode
Or
Turn the heater on by pressing the Power button on the
control panel or by pressing the Power button on the supplied
remote control.
Once power is off, heating element will stop working at first.
The fan will continue to run for approximately three minutes
to emit residual heat inside of the unit.
Or
Select a heat setting.
Press the Mode button to alternate between the two heat
settings.
Under Auto heat-up mode, when the value difference
between set temp and room temp exceeds 5°F or so, the unit
will run at full 1500W, otherwise runs at 750W; Under High
heat-up mode, the unit runs at a stable 1500W, when room
temp exceeds 86°F, heat-up stops.
2. Setting room temperature
Caution! Only in Auto heat-up mode can setting temperature be performed.
Or
Or
Or
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Set temperature indication varies from 64°F to 86°F. Once
you have chosen the desired temperature, the heater will
remain on until the room temperature increases to the
temperature on the digital display. The heater will cycle on
and off to maintain the desired room temperature.
