6
8. Indicating light of auto heat-up mode: Light’s on when you select auto heat-up mode.
9. Power switch button: For power-on or off.
10
.
Power indicator light: Indicates that the heater is receiving power from outlet. Will flash
when powered “ON”
PREPARATION
Unpackage unit. We recommend keeping the packaging for storage and any transporting needs.
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet, and
turn on the power switch in the rear of the unit. Only operate heater in upright position with
caster wheels attached.
When using remote control, please pull out the insulating film as the following steps
.
Mode button: Used for mode selection
ON/OFF button: Used for power-on or power-off
Temp up button: to make set temperature rise
Temp down button: to make set temperature decline
PULL
Remote control
Insulating film
Battery cover
Remote Control
