Eddylight Pro EDDY-HW-01, Руководство пользователя

Страница: 9 / 14

Note
：
when the fault light is on, pls turn off the power of machine in time, to avoid extra damage, and
users are expected to restart the machine until the fault light is off.
Fault light (yellow) display and processing method
Warranty
：
1 Year (Subject to the date of manufacture)
Each machine is affixed with the factory code. The factory code shall be provided when
enjoying the warranty service. It is invalid if torn.
It’s may need provide some videos or pictures to confirm the problems.
1
2
3
After-sales
Display content Fault causes Solution
E01
Heating failure
1: Check if the heat dissipation plate is
normal. 2: Replace the heat dissipation plate or
heating board.
E03
1: Check the cooling fan. 2: stop
heating and operating, restart after 10
minutes.
E02
Heating is not
controlled
Replace the heating board.
The internal
temperature of
the machine is
extremely high
E04
Check whether the feeding motor works
normally and whether the feeding motor is stuck
Feed motor
overcurrent
protection
E05
1
:
Check sensor socket. 2: replace the sensor.
The sensor is
faulty
E06
1: Pls restart the machine, don’t tilt machine again
after power on.
Anti-tilt safety
function is
enabled
E07
Shut down the machine to check whether the
blower motor is working properly
Safety protection
of blower motor