eddyfi Reddy, Руководство пользователя, Страница: 11 / 82

| xi
General Precautions and Conventions
General Precautions
The following safety precautions are to be observed at all times when using Reddy
®
. Make sure that you
review them before turning on the system.
• Keep this document in a safe place for future reference.
• Carefully follow the installation and operation procedures detailed herein.
• Respect the safety warnings on the instrument and in this document.
• Reddy should only be used by qualified personnel.
• When transporting Reddy, it is your responsibility to make sure that you apply the safety precautions
dictated by the relevant local governing bodies.
• Always connect the power supply to a properly grounded receptacle, extension cord, or power
bar. Grounding a single conductor of a two-conductor outlet is not sufficient protection for Reddy.
• Only connect the system to a power source corresponding to the type indicated on the rating plate.
• If you use the system in a manner that deviates from that specified by Eddyfi, the protection
provided on the equipment may be rendered null and void.
• Do not use substitute parts or perform unauthorized modifications to the system.
• Service instructions, when applicable, are intended for trained service personnel only.
• Always make sure that the system is unplugged from any power supply before servicing.
• To avoid dangerous electric shock, do not perform any service on the system unless qualified to do
so. If you encounter any problems or have questions regarding this system, contact Eddyfi or an
authorized Eddyfi representative.
Safety Precautions
Observe the following safety precautions scrupulously when using Reddy.
Rear Stand
Because Reddy is a portable system, it is designed to be used under tough conditions. It is, however, not
indestructible. To avoid damaging Reddy, use its rear stand when operating Reddy in a tilted position.
Do not use Reddy in the upright position, as it may topple over or fall off the work surface.