Eddyfi Technologies TSC PACE, Начало работы

Страница: 6 / 24

4 | www.tscndt.com
Figure 3
Probe Disconnected Message
When the probe is disconnected a “No Probe” message will be displayed on the top of the screen.
Job Setup
The Job Setup window is where the operator can set up all the information relevant to the inspection
before the job begins.
Figure 4 Job Setup Window
In this window the operator can add/edit the Operator names, Site, Component and Sub-Component
used for the job(s). The operator can also filter the displayed data in the Data Screen to display data
selected by Operator, Site, Component or Sub-component.
The Probe Info tab displays the technical attributes of the attached probe (Phase, frequency, Gain,
etc).
Home Screen