13
connector, taking care to ensure the pins and alignment arrows align correctly. Re-clip the cable to
the frame, ensuring that the cable cannot rub against the tyre and that the cable exits in a
downwards direction from the axle to avoid water ingress into the motor. Refit the rubber top hat
cover. Refit the brake caliper referring to section 3.6 for instruction. Because the bicycle has a rear
derailleur, the chain will be automatically adjusted.
3.11
Derailleur and gear change
3.13.1 Full details on how to adjust and maintain your derailleur can be found on the Shimano
website
If the gear change is not smooth it is possible the cable has stretched from new, to adjust
this turn the knurled cable adjuster located at the rear of the derailleur unit ½ turn
anticlockwise when viewed from the rear. This will compensate for the cable stretch. If
necessary, repeat the operation again until smooth gear selection is obtained
3.13.2 To change gear, use the 7 speed rapid fire gear shifter located on the right side of the
handlebar. Push the lever to move up the gears 1 to 7, push the square button to move down
the gears 7 to 1. Move one click at a time while pedaling to reduce stress on the gear change
4
Warranty, battery maintenance and user responsibilities
Repair or replacement of components
IMPORTANT!
To validate this warranty please register the bike by emailing [email protected]
within 30 days of purchase, with the following details:
